"A Mighty Midget"
A simple single-ended pentode amp that uses inexpensive compactron TV tubes. It puts out about 3 watts per channel, and uses only one (two-section) tube per channel. For more information and schematic see Pete Millett's DIY Audio pages on the "A Mighty Midget".
Audio Output Transformers
This package has two GXSE10-8-8K that are 10W, single ended tube output transformer for 8K Ohms to 8 Ohms.
Power Transformer
The XPWR104-120 power transformer is a 120V, 60Hz. line to 250V (125-0-125) center tapped at 125mA and 6.3V at 2A.
Chokes
This package has two PXC63-2H-150mA chokes is a 2H, 150mA printed circuit board mounted inductor.
Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.
The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.
The Bobbins
EDCOR's royal blue bobbin with black finishing tape.
Termination
The terminations are UL1015, 18 ga. lead wire for the XPWR104-120 and UL1015, 20 ga. lead wire for the GXSE10-8-8K. The PXC63-2H-150mA is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing 15000-EI625-087-00P12.
Mounting
These units comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.
