Design
Mathematically designed to produce a turns ratio of 2.4:1 for line level signals.
Primary (Input)
Designed for a balanced or unbalanced signal with a 45 Ohms impedance.
Secondary (Output)
Designed for a balanced or unbalanced signal with an 8 Ohms impedance.
Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.
The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.
The Bobbins
EDCOR's royal blue bobbin with black finishing tape.
Termination/Mounting
This unit is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing.
