Search
Filters
Close
1/4W, 25V or 70V speaker voltage distribution to balanced or unbalanced line level.
Availability: Product is built to order.
Ship date: 8 weeks
$8.12

Design
The PC2570/600 audio matching transformer is designed for matching a 25V or 70V speaker distribution line to a balanced or unbalanced line level.

Primary (Input)
Designed for a 25V and 70V speaker distribution line.

Secondary (Output)
Designed for a balanced or unbalanced 600 Ohms line level signal.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit board mounting. For footprint and suggested hole and pad size please see the dimensional drawing.

Design
The PC2570/600 audio matching transformer is designed for matching a 25V or 70V speaker distribution line to a balanced or unbalanced line level.

Primary (Input)
Designed for a 25V and 70V speaker distribution line.

Secondary (Output)
Designed for a balanced or unbalanced 600 Ohms line level signal.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit board mounting. For footprint and suggested hole and pad size please see the dimensional drawing.

Products specifications
Flamability Rating Class B 130°C
Frequency Response 20~20K Hz., <1dBu
Primary (input) Voltage 25V & 70V
Secondary (output) Impedance 600 Ohms
THD+Noise <0.05% @ 1K Hz.
Insertion Loss 0.5 dB
Bobbin Material Nylon 6/6 GF-30
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 8 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.25 lbs.
Compliance RoHS & REACH
Dimensional Drawing 15000-EI050-037-P08
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Products specifications
Flamability Rating Class B 130°C
Frequency Response 20~20K Hz., <1dBu
Primary (input) Voltage 25V & 70V
Secondary (output) Impedance 600 Ohms
THD+Noise <0.05% @ 1K Hz.
Insertion Loss 0.5 dB
Bobbin Material Nylon 6/6 GF-30
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 8 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.25 lbs.
Compliance RoHS & REACH
Dimensional Drawing 15000-EI050-037-P08
Product tags
Recently viewed products