Search
Filters
Close
1/2W tri-filar wound (1:1:1) line level matching transformer.
Availability: Product is built to order.
Ship date: 6 weeks
*

The primary and secondary transformer impedance.

$17.61

Design
Mathematically designed and tri-filar wound to produce a turns ratio of 1:1:1 for line level signals.

Input/Output
The transformer has three identical windings.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit board mounting. For footprint and suggested hole and pad size please see the dimensional drawing.

Design
Mathematically designed and tri-filar wound to produce a turns ratio of 1:1:1 for line level signals.

Input/Output
The transformer has three identical windings.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit board mounting. For footprint and suggested hole and pad size please see the dimensional drawing.

Products specifications
Wattage 0.5W
Input Maximum Voltage 20Vrms
Turns Ratio 1:1:1
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Insertion Loss 0.5 dB
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 12 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.4 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Products specifications
Wattage 0.5W
Input Maximum Voltage 20Vrms
Turns Ratio 1:1:1
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Insertion Loss 0.5 dB
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 12 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.4 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products