Search
Filters
Close
Dual balanced or unbalanced to dual balanced transformers on a printed circuit board.
Availability: Product is built to order.
Ship date: 2 weeks
*

The primary and secondary transformer impedance.

$27.33

Broadcast Quality Sound
These audio matchers use high quality low noise components to deliver broadcast and recording quality sound.

Continuous Use Design
Each unit is designed to operate continuously.

Duel Balanced or Unbalanced Input
These are balanced or unbalanced inputs. The connectors are 3 pin screw Eurostyle connector.

Duel Balanced or Unbalanced Output
These are balanced or unbalanced outputs. The connectors are 3 pin screw Eurostyle connector.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Surface Mounting
The unit is designed for surface mounting with the use of four screws or with double back tape (not provided).

Broadcast Quality Sound
These audio matchers use high quality low noise components to deliver broadcast and recording quality sound.

Continuous Use Design
Each unit is designed to operate continuously.

Duel Balanced or Unbalanced Input
These are balanced or unbalanced inputs. The connectors are 3 pin screw Eurostyle connector.

Duel Balanced or Unbalanced Output
These are balanced or unbalanced outputs. The connectors are 3 pin screw Eurostyle connector.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Surface Mounting
The unit is designed for surface mounting with the use of four screws or with double back tape (not provided).

Products specifications
Wattage 0.5W
Input Maximum Voltage 5Vrms
Primary (input) Impedance Depends on model.
Secondary (output) Impedance Depends on model.
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination Eurostyle connector
Printed Circuit Board Material FR-4
Mounting Surface Mounted
Weight 0.4 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Products specifications
Wattage 0.5W
Input Maximum Voltage 5Vrms
Primary (input) Impedance Depends on model.
Secondary (output) Impedance Depends on model.
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination Eurostyle connector
Printed Circuit Board Material FR-4
Mounting Surface Mounted
Weight 0.4 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products