Search
Filters
Close
1H at 200mA DC choke.
Availability: Product is built to order.
Ship date: 8 weeks
$21.50

Design
Mathematically designed to produce 1H at 200mA DC. A lower DC current will slightly increase inductance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015 20 ga. lead wire.

Mounting
This unit comes with zinc plated channel/frame for mounting with the use of two screws.

Design
Mathematically designed to produce 1H at 200mA DC. A lower DC current will slightly increase inductance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015 20 ga. lead wire.

Mounting
This unit comes with zinc plated channel/frame for mounting with the use of two screws.

Products specifications
Inductance 1H
Max. Current 200mA
DC Resistance 21 Ohms
Frequency 120 Hz.
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 20 ga. lead wire
Mounting Zinc plated steel channel/frame
Weight 0.75 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
Great Filters
Just what you would expect from Edcor. This little choke gives excellent filtering and always meets or exceeds its specifications. Used with a 100µf capacitor, one LC pair for each channel of a stereo amplifier, gives wide and deep sound stage with excellent imaging. At this price you can't afford not to use them in your next amp project.
From: Matt Renaud | Date: 5/25/2015 5:31 PM
Was this review helpful? Yes No (0/0)
Products specifications
Inductance 1H
Max. Current 200mA
DC Resistance 21 Ohms
Frequency 120 Hz.
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 20 ga. lead wire
Mounting Zinc plated steel channel/frame
Weight 0.75 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products