Search
Filters
Close
Power transformer for a 120V or 240V, 50/60Hz. line to 200V at 40mA and 8V at 1.5A.
Availability: Product is built to order.
Ship date: 8 weeks
*
$16.76

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V or 240V, 50/60Hz.

Secondary (Output)
This transformer has a single voltage winding, 200V at 40mA and 8V at 1.5A.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing.

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V or 240V, 50/60Hz.

Secondary (Output)
This transformer has a single voltage winding, 200V at 40mA and 8V at 1.5A.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing.

Products specifications
Primary (input) Voltage 120Vrms or 240Vrms, 50/60Hz.
Secondary (output) Voltage 200V@40mA & 8V@1.5A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 8 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.75 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
XPWR083A transformer
I installed the transformer in a headphone amp I built, and the dimensions provided in the datasheet were perfect...I was able to draw a PCB footprint of the part that dropped right in place on the PCB...the transformer is very well made and at a seriously good price...
From: Rob Davis | Date: 12/25/2013 5:52 PM
Was this review helpful? Yes No (0/0)
XPWR083A
Be careful placing this transformer into your pcb, if a pin catches, the pin will push up, then break the fine wires. Ask me how I found that out...
From: Philip LaRiviere Jr | Date: 2/15/2017 4:46 PM
Was this review helpful? Yes No (0/0)
Products specifications
Primary (input) Voltage 120Vrms or 240Vrms, 50/60Hz.
Secondary (output) Voltage 200V@40mA & 8V@1.5A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 8 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.75 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products