Search
Filters
Close
Power transformer for a 120V, 60Hz. or 240V, 50/60Hz. line to 640V (320-0-320) at 150mA center tapped, 6.3V (3.15-0-3.15) at 4A center tapped and 5V at 2A.
Availability: Product is built to order.
Ship date: 6 weeks
*
$57.69

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz. or 240V, 50/60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 640V (320-0-320) at 150mA center tapped, 6.3V (3.15-0-3.15) at 4A center tapped and 5V at 2A.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz. or 240V, 50/60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 640V (320-0-320) at 150mA center tapped, 6.3V (3.15-0-3.15) at 4A center tapped and 5V at 2A.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Products specifications
Primary (input) Voltage 120Vrms, 60Hz. or 240Vrms, 50/60Hz.
Secondary (output) Voltage 640V(320-0-320)@150mA, 6.3V(3.15-0-3.15)@4A & 5V@2A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 6 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
Perfect for 20-50 watt High Gain Guitar amps
This is a perfect sized transformer for a pair of EL34 or 6V6GT- 6L6GB in a push pull output stage. Would also be fine for a single ended pair of KT-66 or 6L6GC.Great American made quality, and M-6 steel is a detail not always seen in a low cost PT.
From: Marcus Nestor | Date: 12/7/2011 6:05 PM
Was this review helpful? Yes No (1/0)
Products specifications
Primary (input) Voltage 120Vrms, 60Hz. or 240Vrms, 50/60Hz.
Secondary (output) Voltage 640V(320-0-320)@150mA, 6.3V(3.15-0-3.15)@4A & 5V@2A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 6 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products