Search
Filters
Close
Power transformer for a 120V, 60Hz. line to 690V (345-0-345) at 400mA center tapped with a 60V bias, 12V at 500mA and 6.3V (3.15-0-3.15) at 7.5A center tapped.
Availability: Product is built to order.
Ship date: 6 weeks
*
$94.57

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 690V (345-0-345) at 400mA center tapped with a 60V bias, 12V at 500mA and 6.3V (3.15-0-3.15) at 7.5A center tapped.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 690V (345-0-345) at 400mA center tapped with a 60V bias, 12V at 500mA and 6.3V (3.15-0-3.15) at 7.5A center tapped.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Products specifications
Primary (input) Voltage 120Vrms, 60Hz.
Secondary (output) Voltage 690V(345-60-0-345)@400mA, 12V@500mA & 6.3V(3.15-0-3.15)@7.5A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 9.75 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
I am pushing this one a lot but she still holds up and does the job!! ! Just what I needed!
I have been using Edcor's competitors, having custom wounds and even rewinding, varnishing, .baking & hi-potting old iron. This was utilized for a 96 watt version of a Supro 6424T/1624T. The OT was oversized. I wish Edcor would make a 150 watt, but I only managed to get 96 watts on this amp. Stupid designs attract attention. The world is overflowing with 5E3 clones. If you want an amp that says check me out try a Led Zeppelin I & II Supro circuit with 4x the wattage, and an octet of 6973s running through a cast frame EV shoehorned into a 1x12 combo cab. I was a bit leery of 410 mA or whatever this claims, and it does heat up, but so far we are still making noises that sound like music.   Since I did not jack up the preamp gain, so far I am getting away with 4x under  the 107 mA x4 or 427 mA max signal plate current. I rarely use the EV and usually this drives an extension cab, but the 1x12 @ almost 100 watts is reminiscent of my old Orange Hustler.  
From: Seth Burgin | Date: 1/5/2015 8:43 PM
Was this review helpful? Yes No (0/0)
Products specifications
Primary (input) Voltage 120Vrms, 60Hz.
Secondary (output) Voltage 690V(345-60-0-345)@400mA, 12V@500mA & 6.3V(3.15-0-3.15)@7.5A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 9.75 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products