Search
Filters
Close
Power transformer for a 220V, 50/60Hz., 120V or 240V, 50/60Hz. line to 560V and 100V (280-50-0-50-280) at 200mA center tapped and 6.3V (3.15-0-3.15) at 6A center tapped.
Availability: Product is built to order.
Ship date: 6 weeks
*
$67.25

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 220V, 50/60Hz., 120V or 240V, 50/60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 560V and 100V (280-50-0-50-280) at 200mA center tapped and 6.3V (3.15-0-3.15) at 6A center tapped.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 220V, 50/60Hz., 120V or 240V, 50/60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 560V and 100V (280-50-0-50-280) at 200mA center tapped and 6.3V (3.15-0-3.15) at 6A center tapped.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Products specifications
Primary (input) Voltage 120Vrms, 220Vrms, or 240Vrms, 50/60Hz
Secondary (output) Voltage 560V & 100V (280-50-0-50-280)@200mA & 6.3V(3.15-0-3.15)@6A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 6.75 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
Excellent Product
Bought this for a Trainwreck type amp build and it came out great. This xformer runs super cool and puts out plenty of power to drive a trio of 12ax7 and a duet of KT66 tubes. I've played the amps for hours at a time and the power nevers fluctuates. Nice....
From: Joseph Connolly | Date: 10/18/2013 6:25 AM
Was this review helpful? Yes No (1/0)
Products specifications
Primary (input) Voltage 120Vrms, 220Vrms, or 240Vrms, 50/60Hz
Secondary (output) Voltage 560V & 100V (280-50-0-50-280)@200mA & 6.3V(3.15-0-3.15)@6A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 6.75 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products