Search
Filters
Close
Power transformer for a 120V, 60Hz. line to 600V and 480V (300-240-0-240-300) at 120mA center tapped, 6.3V (3.15-0-3.15) at 3A center tapped and 5V at 2A.
Availability: Product is built to order.
Ship date: 8 weeks
*
$60.21

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 600V and 480V (300-240-0-240-300) at 120mA center tapped, 6.3V (3.15-0-3.15) at 3A center tapped and 5V at 2.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 600V and 480V (300-240-0-240-300) at 120mA center tapped, 6.3V (3.15-0-3.15) at 3A center tapped and 5V at 2.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Products specifications
Primary (input) Voltage 120Vrms, 60Hz.
Secondary (output) Voltage 600V/480V(300-240-0-240-300)@120mA, 6.3V(3.15-0-3.15)@3A & 5V@2A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 6 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
Great Transformer
This transformer has worked out great. It is underrated, it is capable of more current than advertised and barely get warm. Pushing 4ea - 12AX7's and 2ea 6L6 or 6V6 on guitar amp. Gets very loud. Have not actually calculated watts. Using with the CXPP30-MS-6.6K output transformer.  Matched to 6V6 but works well with 6L6 if you adjust output impedance against the speaker impedance. Actually they both sound good used at 6.6k ohm (ex. 8 ohm speaker to 8 ohm tap).  I have tried all output taps to an 8 ohm speaker and they sound best on the 8 ohm tap, to me, 6L6 or 6V6. No overheating on any tap at med volume. Have not tried at high volume for a long period.
From: Steve Galyean | Date: 10/2/2012 9:23 PM
Was this review helpful? Yes No (1/0)
Products specifications
Primary (input) Voltage 120Vrms, 60Hz.
Secondary (output) Voltage 600V/480V(300-240-0-240-300)@120mA, 6.3V(3.15-0-3.15)@3A & 5V@2A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 6 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products