Search
Filters
Close
Power transformer for a 120V, 60Hz. line to 750V (375-0-375) at 350mA center tapped, 6.3V at 6A and 5V at 6A.
Availability: Product is built to order.
Ship date: 6 weeks
*
$90.96

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 750V (375-0-375) at 350mA center tapped, 6.3V at 6A and 5V at 6A.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 750V (375-0-375) at 350mA center tapped, 6.3V at 6A and 5V at 6A.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Products specifications
Primary (input) Voltage 120Vrms, 60Hz.
Secondary (output) Voltage 750V(375-0-375)@350mA, 6.3V@6A & 5V@6A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 9.75 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
Great Leslie Transformer
This is a great replacement for the Leslie power transformer used in 21H (30w), 31H, and 50C Leslie units.  It has all the correct windings, and will replace it all for a solid build.  I bought two of them and could not be happier.  I needed to drill new mounts, but besides that, a complete fit.  Also, it is a vertical bell, as opposed to the stock horizontal, but again, not a big deal.

A great build as always from Edcor, and as things break on other cabinets, I will be sure to order these from Edcor!
From: Patrick Mucha | Date: 1/1/2013 11:26 AM
Was this review helpful? Yes No (0/0)
Products specifications
Primary (input) Voltage 120Vrms, 60Hz.
Secondary (output) Voltage 750V(375-0-375)@350mA, 6.3V@6A & 5V@6A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 9.75 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products