Search
Filters
Close
Power transformer for a 120V, 60Hz. line to 800V (400-0-400) at 100mA center tapped, 6.3V at 2A, 6.3V at 1A, and 5V at 2A.
Availability: Product is built to order.
Ship date: 6 weeks
*
$63.57

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 800V (400-0-400) at 100mA center tapped, 6.3V at 2A, 6.3V at 1A, and 5V at 2A.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Design
Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V, 60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 800V (400-0-400) at 100mA center tapped, 6.3V at 2A, 6.3V at 1A, and 5V at 2A.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Products specifications
Primary (input) Voltage 120Vrms, 60Hz.
Secondary (output) Voltage 800V(400-0-400)@100mA, 6.3V@2A, 6.3V@1A, & 5V@2A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 6 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
Used in Muscovite Phono Pre-Amplifier
Very quiet in operation, temperature rise is very modest under full load - a very conservatively designed transformer.
Voltages are correct at nominal line voltage and over quite a wide range of load currents. Voltage regulation is excellent..
Designed specifically to my requirements, and like the other power transformers Edcor has done for me I don't have to worry whether they will perform correctly and meet specification in my application.
From: Kevin Kennedy | Date: 12/23/2013 9:40 PM
Was this review helpful? Yes No (0/0)
Products specifications
Primary (input) Voltage 120Vrms, 60Hz.
Secondary (output) Voltage 800V(400-0-400)@100mA, 6.3V@2A, 6.3V@1A, & 5V@2A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 6 lbs.
Compliance RoHS & REACH
Product tags
Recently viewed products