The Fender Champ is a 5 watt single ended class "A" guitar amplifier. Model 5E1 gained extra high voltage filtering including a filter choke. A negative feedback loop was also added.
The XPWR283 power transformers were specially designed and built for this amplifier. It come in a 120V 60 Hz., 230V 50/60Hz., or 230V50/60Hz. to 650V (325-0-325) at 100mA center tapped, 6.3V at 2.25A, and 5V at 3A.
The CXSE5 7K is a 5W, single ended tube output transformer for 7K Ohms to 4, 8 or 16 Ohms.
The XC50-4H-50mA is a 4H inductance choke rated at 50mA.
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.
EDCOR's standard bobbin with black finishing tape.
The terminations are UL1015, 20 ga. lead wire for the XPWR283, UL1015, 20 ga. lead wire for the CXSE5 7K, and UL1015, 20 ga. lead wire for the XC choke.
These transformers are designed to replace the orginal stock transformers. You should still check to make sure that the dimensions of the transformers will fit in the space in your amplifier.