Search
Filters
Close
400mW, 50 Ohms to 10K Ohms (1:14.1 ratio) audio/signal matching transformer.
Availability: Product is built to order.
$5.73

Design
Mathematically designed to produce a turns ratio of 1:14.1 for line level signals.

Primary (Input)
Designed for a balanced or unbalanced signal with a 50 Ohms impedance.

Secondary (Output)
Designed for a balanced or unbalanced signal with an 10K Ohms impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing.

Documents
  COM60 Series Manual
  Drawing 15000-EI025-025-P10.pdf
  Drawing 15000-EI025-025-P10.dwg
  Drawing 15000-EI025-025-P10.dxf

Design
Mathematically designed to produce a turns ratio of 1:14.1 for line level signals.

Primary (Input)
Designed for a balanced or unbalanced signal with a 50 Ohms impedance.

Secondary (Output)
Designed for a balanced or unbalanced signal with an 10K Ohms impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing.

Documents
  COM60 Series Manual
  Drawing 15000-EI025-025-P10.pdf
  Drawing 15000-EI025-025-P10.dwg
  Drawing 15000-EI025-025-P10.dxf

Products specifications
Wattage 0.4W
Input Maximum Voltage 2V @ 100Hz.
Turns Ratio 1:14.1
Primary (input) Impedance 50 Ohms
Secondary (output) Impedance 10K Ohms
Frequency Response 100Hz~15KHz, <1dBu
THD+Noise <0.1% @ 1K Hz.
Bobbin Material Glass Filled Nylon 6/6
Flamability Rating Class B 130°C
Core Material M6 29 ga. line grain oriented steel
Mounting Printed circuit board mounted (PCB)
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Products specifications
Wattage 0.4W
Input Maximum Voltage 2V @ 100Hz.
Turns Ratio 1:14.1
Primary (input) Impedance 50 Ohms
Secondary (output) Impedance 10K Ohms
Frequency Response 100Hz~15KHz, <1dBu
THD+Noise <0.1% @ 1K Hz.
Bobbin Material Glass Filled Nylon 6/6
Flamability Rating Class B 130°C
Core Material M6 29 ga. line grain oriented steel
Mounting Printed circuit board mounted (PCB)
Compliance RoHS & REACH
Product tags
Recently viewed products