There is 1 item in your cart. Sub-Total: $11.39
Recently viewed products

CXPP25-MS-4K

25W, push-pull tube output transformer for 4K Ohms to 4, 8 and 16 Ohms.
$58.45

Design
Mathematically designed to produce exact plate and screen voltages.

Primary (Input)
The input is designed for a 4K Ohms impedance source.

Secondary (Output)
The output is designed for a 4, 8 and 16 Ohms speaker impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015, 20 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Documents
  CXPP25-MS-4K Series Manual
  Drawing 15000-EI125-125-0X.pdf
  Drawing 15000-EI125-125-0X.dwg
  Drawing 15000-EI125-125-0X.dxf

Design
Mathematically designed to produce exact plate and screen voltages.

Primary (Input)
The input is designed for a 4K Ohms impedance source.

Secondary (Output)
The output is designed for a 4, 8 and 16 Ohms speaker impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015, 20 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Documents
  CXPP25-MS-4K Series Manual
  Drawing 15000-EI125-125-0X.pdf
  Drawing 15000-EI125-125-0X.dwg
  Drawing 15000-EI125-125-0X.dxf

Products specifications
Wattage 25W
Primary (input) Impedance 4K Ohms
Screen/Grid Tap 40%
Secondary (output) Impedance 4, 8 & 16 Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.1% @ 1K Hz.
Bobbin Material Glass Filled Nylon 6/6
Flamability Rating Class B 130°C
Core Material M6 29 ga. line grain oriented steel
Termination UL1015, 20 ga. lead wire
Mounting Powder coated steel end bells
Weight 4.5 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent