CXPP30-5K

Previous productCXPP25-8K

Next productCXPP30-6.6K

30W, push-pull tube output transformer for 5K Ohms to a specified output.

Availability: Product is built to order.

Ship date: 8 weeks

2 review(s) | Add your review

Secondary (Output) Impedance *

$71.64

Qty:

Design
Mathematically designed to produce exact plate and screen voltages.

Primary (Input)
The input is designed for a 5K Ohms impedance source.

Secondary (Output)
The output is designed for a specified speaker impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 20 and 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Overview
Specifications
Reviews
Product Files

Design
Mathematically designed to produce exact plate and screen voltages.

Primary (Input)
The input is designed for a 5K Ohms impedance source.

Secondary (Output)
The output is designed for a specified speaker impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 20 and 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Products specifications

Wattage	30W
Primary (input) Impedance	5K Ohms
Screen/Grid Tap	40%
Secondary (output) Impedance	Depends on model.
Frequency Response	20~20K Hz., <1dBu
THD+Noise	<0.1% @ 1K Hz.
Bobbin Material	Nylon 6/6 GF-30
Flamability Rating	Class B 130°C
Core Material	M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer)	Clear air dry polyester varnish
Termination	UL1015, 20 ga. lead wire
Mounting	Powder coated steel end bells
Color	RAL 5010 Gentian Blue
Weight	6 lbs.
Compliance	RoHS & REACH

Write your own review

Only registered users can write reviews

Review title:

Review text:

Rating:

Bad
Excellent

Existing reviews

Great OT

Bought this for a KT66 type amp and boy does it sound good. Crisp cleans and smooth overdrive from a Trainwreck type circuit. With a cathode biased circuit I'm running at almost 100% dissapation and the OT never even gets hot. Very nice.

From: Joseph Connolly | Date: 10/18/2013 6:29 AM

Was this review helpful? Yes No (0/0)

Blue Tube Amp

Bought one of these for our proof of concept blue tooth tube amp.

Going retro on this one, Just a pair of 6l6 and some 6sn7 to drive them, Trying to build a blue tooth sound system that dose not suck....WoW! Coupled everything with .47s running at 450 volts on the output with a separate 37 to 57 volt bias supply, This transformer really dose pass all the music crisp and true. Presents the best sqr wave on the scope I have ever seen out of a tube rig.

From: James Sanderson | Date: 3/22/2015 5:20 PM

Was this review helpful? Yes No (0/0)

Product Files

Dimensional Drawings

Products specifications

Wattage	30W
Primary (input) Impedance	5K Ohms
Screen/Grid Tap	40%
Secondary (output) Impedance	Depends on model.
Frequency Response	20~20K Hz., <1dBu
THD+Noise	<0.1% @ 1K Hz.
Bobbin Material	Nylon 6/6 GF-30
Flamability Rating	Class B 130°C
Core Material	M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer)	Clear air dry polyester varnish
Termination	UL1015, 20 ga. lead wire
Mounting	Powder coated steel end bells
Color	RAL 5010 Gentian Blue
Weight	6 lbs.
Compliance	RoHS & REACH

Product tags

4 Ohms (56)
,
8 Ohms (71)
,
16 Ohms (31)
,
30W (7)
,
amplifier (134)
,
push-pull (65)
,
Class X (124)
,
5K Ohms (14)
,
valve (306)
,
end bell (82)

Customers Who Bought This Item Also Bought

VC-125 (RAW)

Unpainted vertical steel end bells for US EI-125 (1-1/4") lamination.

$4.83
XPWR007

Power transformer for a 120V, 60Hz. or 240V, 50/60Hz. line to 550V (275-0-275) at 200mA center tapped, 6.3V at 6A and 5V at 3A.

$73.33
XPWR106

Power transformer for a 100V, 50/60Hz., 120V or 240V, 50/60Hz. line to 550V (275-0-275) at 125mA center tapped and 6.3V at 4A.

$55.49
CXPP30-6.6K

30W, push-pull tube output transformer for 6.6K Ohms to a specified output.

$71.64
XPWR023

Power transformer for a 120V, 60Hz. line to 600V (300-0-300) at 250mA center tapped and two 6.3V (3.15-0-3.15) at 4A center tapped.

$79.36
XPWR010

Power transformer for a 120V or 240V, 50/60Hz. line to 750V (375-0-375) at 175mA center tapped, 6.3V at 6A center tapped and 5V at 3A center tapped.

$97.38
XPWR005

Power transformer for a 120V, 60Hz. or 240V, 50/60Hz. line to 660V (330-0-330) at 180mA center tapped and two 6.3V at 2.5A.

$59.42
XPWR002

Power transformer for a 120V, 60Hz. or 240V, 50/60Hz. line to 720V (360-0-360) at 220mA center tapped, 60V at 800mA, 6.3V at 7A and 5V at 4A.

$72.70
XPWR093

Power transformer for a 120V, 60Hz. line to 500V (250-0-250) at 300mA, 6.3V (3.15-0-3.15) at 7A center tapped and 5V at 5A.

$101.67
XC75-15H-75mA

15H at 75mA DC choke.

$30.72

CXPP30-5K

Related Products

Customers Who Bought This Item Also Bought