CXPP30-6.6K

Previous productCXPP30-5K

Next productCXPP60-6.6K

30W, push-pull tube output transformer for 6.6K Ohms to a specified output.

Availability: Product is built to order.

Ship date: 6 to 8 weeks

1 review(s) | Add your review

Secondary (Output) Impedance *

$66.37

Qty:

Design
Mathematically designed to produce exact plate and screen voltages.

Primary (Input)
The input is designed for a 6.6K Ohms impedance source.

Secondary (Output)
The output is designed for a specified speaker impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 20 and 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Overview
Specifications
Reviews
Product Files

Design
Mathematically designed to produce exact plate and screen voltages.

Primary (Input)
The input is designed for a 6.6K Ohms impedance source.

Secondary (Output)
The output is designed for a specified speaker impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015 20 and 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Products specifications

Wattage	30W
Primary (input) Impedance	6.6K Ohms
Screen/Grid Tap	40%
Secondary (output) Impedance	Depends on model.
Frequency Response	20~20K Hz., <1dBu
THD+Noise	<0.1% @ 1K Hz.
Bobbin Material	Nylon 6/6 GF-30
Flammability Rating	Class B 130°C
Core Material	M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer)	Clear air dry polyester varnish
Termination	UL1015, 20 ga. lead wire
Mounting	Powder coated steel end bells
Color	RAL 5010 Gentian Blue
Weight	6 lbs.
Compliance	RoHS & REACH

Write your own review

Only registered users can write reviews

Review title:

Review text:

Rating:

Bad
Excellent

Existing reviews

Guitar Amp Output xfmr - Sounds Excelent, Looks good.

CXPP30-MS-6.6K output transformer. For the price I like the quality better than other more popular brand. Matched to Fender clone 6V6 but works well with 6L6 if you adjust output impedance against the speaker impedance. Actually they both sound good used at 6.6k ohm (ex. 8 ohm speaker to 8 ohm tap). I have tried all output taps to an 8 ohm speaker on 6V6 and 6L6. No overheating on any tap at med volume. Have not tried at high volume for a long period. Runs cool or slightly warm. This transformer has as much iron as my Epiphone 40 watt amp, and is easily as loud. Using Power Xfmr XPWR145-120 with tube rectifier, 5ea 12AX7's and 2 output tubes.

From: Steve Galyean | Date: 10/2/2012 9:35 PM

Was this review helpful? Yes No (1/0)

Product Files

Dimensional Drawings

15000-EI125-150-0X.pdf

Products specifications

Wattage	30W
Primary (input) Impedance	6.6K Ohms
Screen/Grid Tap	40%
Secondary (output) Impedance	Depends on model.
Frequency Response	20~20K Hz., <1dBu
THD+Noise	<0.1% @ 1K Hz.
Bobbin Material	Nylon 6/6 GF-30
Flammability Rating	Class B 130°C
Core Material	M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer)	Clear air dry polyester varnish
Termination	UL1015, 20 ga. lead wire
Mounting	Powder coated steel end bells
Color	RAL 5010 Gentian Blue
Weight	6 lbs.
Compliance	RoHS & REACH

Product tags

4 Ohms (69)
,
8 Ohms (83)
,
16 Ohms (45)
,
30W (7)
,
amplifier (157)
,
push-pull (78)
,
Class X (147)
,
valve (331)
,
end bell (97)
,
6.6K Ohms (8)

Customers Who Bought This Item Also Bought

CXC125-10H-200mA

10H at 200mA DC choke.

$61.37
GXSE10-6-8K

10W, single ended tube output transformer for 8K Ohms to 6 Ohms.

$37.99
XPWR011

Power transformer for a 120V, 60Hz. line to 800V (400-0-400) at 200mA center tapped, 6.3V (3.15-0-3.15) at 5A center tapped and 5V at 3A.

$77.28
CXC100-5H-200mA

5H at 200mA DC choke.

$43.98
GXSE10-5K

10W, single ended tube output transformer for 5K Ohms to a specified output.

$37.99
XPWR065

Power transformer for a 120V, 60Hz. or 240V, 50/60Hz. line to 500V (250-0-250) at 250mA center tapped and 6.3V at 4A.

$59.41
VC-125 (RAW)

Unpainted vertical steel end bells for US EI-125 (1-1/4") lamination.

$4.83
XPWR178

Power transformer for a 120V or 240V, 50/60Hz. line to 660V (330-0-330) at 200mA center tapped, 6.3V (3.15-0-3.15) at 6A center tapped and 5V (2.5-0-2.5) at 3A center tapped.

$67.37
XPWR066

Power transformer for a 240V, 50/60Hz. line to 600V (300-0-300) at 200mA center tapped, 6.3V at 4A and 5V at 3A.

$63.96
XPWR149

Power transformer for a 120V or 240V, 50/60Hz. line to 800V (400-0-400) at 250mA center tapped, 6.3V (3.15-0-3.15) at 1.2A center tapped, 6.3V at 5A and 5V at 3A.

$84.31

CXPP30-6.6K

Related Products

Customers Who Bought This Item Also Bought