There is 1 item in your cart. Sub-Total: $11.39
Recently viewed products

CXSE25-8-150

25W, single ended tube output transformer for 150 Ohms to 8 Ohms.
$87.84

Design
Mathematically designed to produce exact plate and screen voltages. These transformers are precision gapped to adjust for unbalanced DC current.

Primary (Input)
The input is designed for a 150 Ohms impedance source.

Secondary (Output)
The output is designed for a 8 Ohms speaker impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015, 20 and 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Documents
  CXSE25-8-150 Series Manual
  Drawing 15000-EI150-200-0X.pdf
  Drawing 15000-EI150-200-0X.dwg
  Drawing 15000-EI150-200-0X.dxf

Design
Mathematically designed to produce exact plate and screen voltages. These transformers are precision gapped to adjust for unbalanced DC current.

Primary (Input)
The input is designed for a 150 Ohms impedance source.

Secondary (Output)
The output is designed for a 8 Ohms speaker impedance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's royal blue bobbin with black finishing tape.

Termination
The terminations are UL1015, 20 and 18 ga. lead wire.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.

Documents
  CXSE25-8-150 Series Manual
  Drawing 15000-EI150-200-0X.pdf
  Drawing 15000-EI150-200-0X.dwg
  Drawing 15000-EI150-200-0X.dxf

Products specifications
Wattage 25W
Max. Current 400mA
Primary (input) Impedance 150 Ohms
Screen/Grid Tap 40%
Secondary (output) Impedance 8 Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.1% @ 1K Hz.
Bobbin Material Glass Filled Nylon 6/6
Flamability Rating Class B 130°C
Core Material M6 29 ga. line grain oriented steel
Termination UL1015, 20 & 18 ga. lead wire
Mounting Powder coated steel end bells
Weight 9.75 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
A quality low impedance transformer
I am very pleased that Edcor has put this once special order item in their regular product line.  It is the perfect impedance level in a transformer for either a single or paralleled 6C33 tube to work into.  It is also ideal for use in a circuit having a paralleled 6AS7 (both sides of the tube).  The sound output is magnificent and the price is a welcome change from the prices of those competitors up north and in the east ... and it is made in the good old USA.
From: Bruce Rep | Date: 11/11/2010 11:45 AM
Was this review helpful? Yes No (1/0)