Stereo 35 (ST-35)

The "Dynakit Stereo 35 Power Amplifier"
A push-pull stereo valve amplifier using 6BQ5 (EL84) tubes. Kit designed by Dynaco (Dyna Company.

(1) Power Transformer
The XPWR005 power transformer is a 120V, 60Hz. or 240V, 50/60Hz. line to 660V (330-0-330) at 180mA center tapped and two 6.3V at 2.5A.

(2) Audio Output Transformers
There are two CXPP25-MS-8K/23% audio transformers. This audio output transformer is a 25W, push-pull tube output transformer for 8K Ohms input impedance with 23% grid/screen tap to 4, 8, and 16 Ohms.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's standard bobbin with black finishing tape.

Termination
The terminations are UL1015, 18 ga. lead wire for the XPWR236 and UL1015, 20 ga. lead wire for the CXPP10-MS-10K.

Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance. Please not that the size may bit a little larger then the Dynaco unit.