There is 1 item in your cart. Sub-Total: $11.39
Recently viewed products

MXL8cs

1:8 ratio microphone level matching transformer with copper shielding.
$32.43

Design
Mathematically designed to produce a turns ratio of 1:8 for microphone or line level signals.

Primary (Input)
Designed for a balanced or unbalanced microphone or line level signal.

Secondary (Output)
Designed for a balanced or unbalanced microphone or line level signal.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's royal blue bobbin with black finishing tape.

Copper Shielding
Outer copper shield around winding and core to help eliminate outside interference.

Termination/Mounting
This unit is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing.

Documents
  MXL8cs Manual
  Frequency Response/THD+N Plot
  Drawing 15000-EI050-037-P08.pdf
  Drawing 15000-EI050-037-P08.dwg
  Drawing 15000-EI050-037-P08.dxf

Design
Mathematically designed to produce a turns ratio of 1:8 for microphone or line level signals.

Primary (Input)
Designed for a balanced or unbalanced microphone or line level signal.

Secondary (Output)
Designed for a balanced or unbalanced microphone or line level signal.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's royal blue bobbin with black finishing tape.

Copper Shielding
Outer copper shield around winding and core to help eliminate outside interference.

Termination/Mounting
This unit is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing.

Documents
  MXL8cs Manual
  Frequency Response/THD+N Plot
  Drawing 15000-EI050-037-P08.pdf
  Drawing 15000-EI050-037-P08.dwg
  Drawing 15000-EI050-037-P08.dxf

Products specifications
Input Maximum Voltage 2.5Vrms
Turns Ratio 1:8
Primary (input) DCR 20 Ohms
Primary (input) Inductance 0.3H
Secondary (output) DCR 435 Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Insertion Loss 0.5 dB
Copper Shielding Yes
Bobbin Material Glass Filled Nylon 6/6
Flamability Rating Class B 130°C
Core Material M6 29 ga. line grain oriented steel
Termination 8 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.25 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent