Search
Filters
Close
1/4W balanced or unbalanced 15K Ohms to balanced or unbalanced 10K Ohms line level matching transformer.
Availability: Product is built to order.
Ship date: 10 to 12 weeks
$12.00

Design
Mathematically designed to match line level signals.

Primary (Input)
Designed for a balanced or unbalanced 15K Ohms line level signal.

Secondary (Output)
Designed for a balanced or unbalanced 10K Ohms line level signal.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit board mounting. For footprint and suggested hole and pad size please see the dimensional drawing.

Design
Mathematically designed to match line level signals.

Primary (Input)
Designed for a balanced or unbalanced 15K Ohms line level signal.

Secondary (Output)
Designed for a balanced or unbalanced 10K Ohms line level signal.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit board mounting. For footprint and suggested hole and pad size please see the dimensional drawing.

Products specifications
Wattage 0.25W
Turns Ratio 1.2:1
Input Maximum Voltage 5Vrms
Primary (input) Impedance 15K Ohms
Secondary (output) Impedance 10K Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Insertion Loss 0.5 dB
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 8 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.2 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Product Files
Dimensional Drawings
Products specifications
Wattage 0.25W
Turns Ratio 1.2:1
Input Maximum Voltage 5Vrms
Primary (input) Impedance 15K Ohms
Secondary (output) Impedance 10K Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Insertion Loss 0.5 dB
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 8 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.2 lbs.
Compliance RoHS & REACH
Product tags