S2M-C

Broadcast Quality Sound
These audio couplers use high quality low noise components to deliver broadcast and recording quality sound.

Continuous Use Design
Each unit is designed to operate continuously.

Stereo Unbalanced Line Input
This is a stereo unbalanced 10K Ohms auxiliary line input. The connector is a stereo 3.5mm (1/8") jack. This input is ideal for stereo computer line outputs, iPods, MP3 players, tape decks, tuners or other stereo unbalanced auxiliary level inputs. Tip signal "A", ring signal "B", sleeve ground.

Mono Balanced Line Output
This is a balanced 600 Ohms line level output. The connector is a 3 pin screw Eurostyle connector. This output is ideal for telephone lines. signal processors, amplifiers, or any other units that have a balanced line input.

Mono Unbalanced Line Output
This output is designed to supply signal to any mono unbalanced auxiliary level input like an amplifier, system monitor, mixer, etc. the output connector is a mono 3.5mm (1/8") jack. Tip signal, ring/sleeve ground.

Surface Mounting
The unit is designed for surface mounting with the use of four screws or with double back tape (not provided).