Search
Filters
Close
Unbalanced 600/10K/15K Ohms to unbalanced 600/10K/15K Ohms. Three primary impedance taps and three secondary impedance taps.
Availability: Product is built to order.
Ship date: 3 weeks
$30.52

Broadcast Quality Sound
These audio matchers use high quality low noise components to deliver broadcast and recording quality sound.

Continuous Use Design
Each unit is designed to operate continuously.

Unbalanced Input
This is an unbalanced input with impedance taps of 600 Ohms, 10K Ohms, and 15K Ohms. The connectors are 4 pin screw Eurostyle connectors.

Unbalanced Output
This is an unbalanced output with impedance taps of 600 Ohms, 10K Ohms, and 15K Ohms. The connectors are 4 pin screw Eurostyle connectors.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's glass filled bobbin with black finishing tape.

Surface Mounting
The unit is designed for surface mounting with the use of four screws or with double back tape (not provided).

Broadcast Quality Sound
These audio matchers use high quality low noise components to deliver broadcast and recording quality sound.

Continuous Use Design
Each unit is designed to operate continuously.

Unbalanced Input
This is an unbalanced input with impedance taps of 600 Ohms, 10K Ohms, and 15K Ohms. The connectors are 4 pin screw Eurostyle connectors.

Unbalanced Output
This is an unbalanced output with impedance taps of 600 Ohms, 10K Ohms, and 15K Ohms. The connectors are 4 pin screw Eurostyle connectors.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbins
EDCOR's glass filled bobbin with black finishing tape.

Surface Mounting
The unit is designed for surface mounting with the use of four screws or with double back tape (not provided).

Products specifications
Wattage 0.5W
Input Maximum Voltage (20Hz.) 6Vrms
Input Maximum Voltage (40Hz.) 12Vrms
Primary (input) Impedance 600, 10K, & 15K Ohms
Secondary (output) Impedance 600, 10K, & 15K Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Termination Eurostyle connector
Secondary Insulation (transformer) Clear air dry polyester varnish
Printed Circuit Board Material FR-4
Mounting Surface Mounted
Weight 0.2 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Product Files
Dimensional Drawings
Products specifications
Wattage 0.5W
Input Maximum Voltage (20Hz.) 6Vrms
Input Maximum Voltage (40Hz.) 12Vrms
Primary (input) Impedance 600, 10K, & 15K Ohms
Secondary (output) Impedance 600, 10K, & 15K Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Termination Eurostyle connector
Secondary Insulation (transformer) Clear air dry polyester varnish
Printed Circuit Board Material FR-4
Mounting Surface Mounted
Weight 0.2 lbs.
Compliance RoHS & REACH
Product tags